Maximum power point tracking supported proton exchange membrane fuel cell based intelligent dynamic voltage restorer

In modern era, electrical power utilities are more concerned about power quality. In this endeavour, dynamic voltage restorer (DVR) provides adequate support to the system. Accordingly, the present work illustrates intelligent hybrid control mechanism for DVR. Artificial neural network (ANN) is incorporated to obtain real-time optimal gains under distinct voltage situations. Closed loop type 2 fuzzy logic (CLT2-FL) is also realized in order to assist the ANN supported unit concomitantly. In order to enhance the potential of the present DVR, a CLT2-FL controlled maximum power point tracking (MPPT) based proton exchange membrane fuel cell arrangement is also explored in the present study. CLT2-FL module is adopted in DC-DC converter topology to provide simultaneous supply to the loads at different and regulated voltage levels. Consequently, the results are evaluated and compared to the state-of-the-arts which unveil the efficacy of the implemented controller against the oddity seen in the voltage waveform, thereby, exhibiting better voltage regulation and less harmonics. The effectiveness of the implemented MPPT unit from the viewpoints of convergence speed and oscillations is also established.     

非摆线型采油螺杆泵转子复合加工机床研制

针对现有双头螺杆泵转子线型存在的问题以及加工方法的局限性,通过研究非摆线螺杆泵转子线型形成原理,设计了非摆线型采油螺杆泵转子复合加工机床,利用立铣刀对做行星运动的工件进行包络,加工出非摆线型螺杆泵转子。根据机床的机械结构以及转子加工表面的形成运动,对转子加工机床进行了运动分析,确定了机床各轴之间的运动关系。并分析立铣刀在加工转子时所产生的截面轮廓误差,确定了误差随工件自转转速变化的关系,对非摆线型螺杆泵转子的加工提供了参考。     

新型矿用旋转筛设计研究

设计一种新型矿用旋转筛,利用7个筛板安装在旋转轴上,通过变频电机带动旋转轴与筛板转动,筛条间距根据物料筛分要求来设计,从而达到对煤矿物料的分级分离目的。根据筛分规格数量,可以串联2个以上旋转筛来使用。通过EDEM和ANSYS仿真,验证设计的合理性;通过样机试验验证,表明可以对煤矿石进行很好的筛分,而且具有节能、环保和成本低等优点。     

白云鄂博云母型低品位稀土-铁矿石选矿试验研究

针对白云鄂博铁精矿杂质含量高的问题,进行分类选矿。以云母型低品位铁-稀土矿石为对象,原矿TFe品位17.48%,主要以磁铁矿和赤铁矿形式存在,且细粒级中分布率较高。通过阶段磨矿-弱磁选回收磁性铁,弱磁尾矿强磁-磨矿-强磁-反浮选回收弱磁性氧化铁工艺,在最佳条件下获得TFe品位为65.49%,产率为20.85%,回收率为66.77%的铁精矿,对该矿石的开发利用具有借鉴意义。     

Investigation of structural,electronic and lattice dynamical properties of XNiH3 (X = Li,Na and K) perovskite type hydrides and their hydrogen storage applications

XNiH₃ (X = Li, Na, and K) perovskite type hydrides have been studied by using Density Functional Theory (DFT) and these materials are found to be stable and synthesizable. The X-ray diffraction patterns have been obtained and they indicate that all materials have the polycrystalline structure. The electronic properties have been investigated and it has been found that these structures show metallic character. The Bader partial charge analysis has also been performed. In addition, the elastic constants have been calculated and these materials are found to be mechanically stable. Using these elastic constants, the mechanical properties such as bulk modulus, shear modulus, Poisson's ratio have been obtained. Moreover, the Debye temperatures and thermal conductivities have been studied. The anisotropic elastic properties have been visualized in three dimensions (3D) for Young's modulus, linear compressibility, shear modulus and Poisson's ratio as well as with the calculation of the anisotropic factors. Additionally, the dynamical stability has been investigated and obtained phonon dispersion curves show that these materials are dynamically stable. Also, the thermal properties including free energy, enthalpy, entropy and heat capacity have been studied. The hydrogen storage properties have been examined and the gravimetric hydrogen storage capacities have been calculated as 4.40 wt%, 3.57 wt% and 3.30 wt% for LiNiH₃, NaNiH₃ and KNiH₃, respectively. Furthermore, the hydrogen desorption temperatures have been obtained as 446.3 K, 419.5 K and 367.5 K for LiNiH₃, NaNiH₃ and KNiH₃, respectively.     

基于同轴图像传感的激光焊接过程质量监测技术

针对激光焊接过程中由于参数不匹配、装配误差等原因造成的焊接过程不稳定等焊接缺陷，基于同轴图像传感技术，建立起一套激光焊接过程中的质量在线监测系统，对焊接过程中的熔池图像进行了采集分析及其熔池特征信息的提取. 结果表明，在激光功率为1 500 W的不等厚不锈钢薄板激光焊接试验条件下，焊接过程中的不稳定、下塌缺陷以及焊偏现象与熔池形状各特征信息变化具有一定的相关性. 结合BP神经网络算法对所提特征信息进行分类、识别，基于LabVIEW软件平台，可实现相应缺陷的自动化识别及报警功能.     

三维圆弧型井眼轨道设计模型的拟解析解

为了研究三维圆弧型井眼轨道设计方程组是否存在解析解以及如何有效求解，使用消去法从多元非线性方程组中推导出其中的某个未知数满足一个特征多项式方程，并且证明了该方程组的拟解析解可以由特征多项式方程的实数根和已知设计参数构成的解析公式计算得到；如果极点多项式非恒等于0，则当特征多项式次数不超过5时，如果有解则为解析解，否则为数值解。通过使用C++类实现多项式加减法、乘法的计算方法，提出了多项式实数根的分隔算法、并用二分法快速求解出多项式全部实数根的计算方案。该方法在数学上经严格推导，计算方案简洁、稳健，在三维井眼轨道设计、智能钻井定向控制中具有应用价值。